Dissolved hydrocarbons

From Wikimarcellus

(Difference between revisions)
Jump to: navigation, search
Revision as of 23:45, 15 December 2011
Tcopley (Talk | contribs)
(fracturing fluid)
← Previous diff
Current revision
Tcopley (Talk | contribs)
(cop122011)
Line 1: Line 1:
-'''Dissolved hydrocarbons''' are found in both [[flowback water|flowback]] and [[produced water]]. Some are pumped down the well during [[hydro-fracturing]]. These consist of glycols used in descaling and some light petroleum distillates used to enhance viscosity of the [[fracturing fluid]]. These are generally around 0.1% of the drilling fluid volume.+'''Dissolved hydrocarbons''' are found in both [[flowback water|flowback]] and [[produced water]]. Some are pumped down the well during [[hydro-fracturing]]. These consist of glycols used in descaling and some light petroleum distillates used to enhance viscosity of the [[fracturing fluid]]. These are generally around 0,1% of the [[fracturing fluid]] volume.
-Flowback water typically contains both free and dissolved hydrocarbons that come from the shale formation. These are dissolved in the frac water when it is pumped underground and held there under pressure during hydro-fracturing. Many of these are lighter than water and return to the surface with the flowback. Concentrations in the flowback water are usually low--below 100 parts per million. These can generally be removed by absorption using activated carbon during treatment. There are federal and state regulations preventing release of dissolved and free hydrocarbons into water steams, so they must be removed.+Flowback water typically contains both free and dissolved hydrocarbons that come from the formations. These are dissolved in the frac water when it is pumped underground and held there under pressure during hydro-fracturing. Many of these are lighter than water and return to the surface with the flowback. Concentrations in the flowback water are usually low--below 100 parts per million. These can generally be removed by absorption using activated carbon during treatment. There are federal and state regulations preventing release of dissolved and free hydrocarbons into water steams, so they must be removed.
 + 
 +[[Category:Drilling practices]]

Current revision

Dissolved hydrocarbons are found in both flowback and produced water. Some are pumped down the well during hydro-fracturing. These consist of glycols used in descaling and some light petroleum distillates used to enhance viscosity of the fracturing fluid. These are generally around 0,1% of the fracturing fluid volume.

Flowback water typically contains both free and dissolved hydrocarbons that come from the formations. These are dissolved in the frac water when it is pumped underground and held there under pressure during hydro-fracturing. Many of these are lighter than water and return to the surface with the flowback. Concentrations in the flowback water are usually low--below 100 parts per million. These can generally be removed by absorption using activated carbon during treatment. There are federal and state regulations preventing release of dissolved and free hydrocarbons into water steams, so they must be removed.

Personal tools