Drilling locations

From Wikimarcellus

(Difference between revisions)
Jump to: navigation, search
Revision as of 22:10, 2 January 2011
Tcopley (Talk | contribs)

← Previous diff
Current revision
Tcopley (Talk | contribs)

Line 1: Line 1:
-'''Drilling locations''' are usually organized into quadrants--that is, rectangular tracts--depending upon geographical layout of the area. +'''Drilling locations''' are, when possible, organized into rectangular tracts, called ''units,'' that are usually about 640 acres in size (the number of acres in a one mile by one mile plot).
-In northeastern Pennsylvania [[Marcellus shale]] drilling typically proceeds in a straight line northwest and southeast. +In northeastern Pennsylvania [[Marcellus shale]] is typically best mined, or [[hydro-fracturing|fraced]], when the [[horizontal drilling|horizontal drill]] bit direction is driven north-northwest or south-southeast (i.e. approximately 10-15 degrees to the west of due north or, reciprocally, 10-15 degrees to the east of due south.) Mining can be done in other directions, too, but the north-northwest and due opposite direction are considered optimal.
-Each quadrant is approximately 1000 feet wide made up of 3 [[horizontal drilling|horizontal wells]] side-by-side separated by approximately 200 feet. Wells may extend horizontally from their [[pad drilling|pad]] out roughly 6000 feet in either direction going northwest to southeast. Each quadrant is 1000 feet wide by 12,000 feet long. Quadrants all run side-by-side and end-to-end. +Each 640 unit contains a [[pad drilling|well pad]], or operations area, approximately 5 acres in size. The well pad supports drilling and gathering, or pipeline, activity. Each pad generally supports approximately six individual wells that are drilled vertically to about 5,000 feet (if drilling the Marcellus) before turning horizontally. Horizontal or ''lateral'' legs tend to range from 3,500 feet to 5,000 feet in length, although new technology has supported legs that are up to 9,000 feet long. A variety of considerations, including geology, shale thickness, and costs related to the amounts of gas produced by the wells determine lateral lengths.
[[Category:Drilling practices]] [[Category:Drilling practices]]

Current revision

Drilling locations are, when possible, organized into rectangular tracts, called units, that are usually about 640 acres in size (the number of acres in a one mile by one mile plot).

In northeastern Pennsylvania Marcellus shale is typically best mined, or fraced, when the horizontal drill bit direction is driven north-northwest or south-southeast (i.e. approximately 10-15 degrees to the west of due north or, reciprocally, 10-15 degrees to the east of due south.) Mining can be done in other directions, too, but the north-northwest and due opposite direction are considered optimal.

Each 640 unit contains a well pad, or operations area, approximately 5 acres in size. The well pad supports drilling and gathering, or pipeline, activity. Each pad generally supports approximately six individual wells that are drilled vertically to about 5,000 feet (if drilling the Marcellus) before turning horizontally. Horizontal or lateral legs tend to range from 3,500 feet to 5,000 feet in length, although new technology has supported legs that are up to 9,000 feet long. A variety of considerations, including geology, shale thickness, and costs related to the amounts of gas produced by the wells determine lateral lengths.

Personal tools